Sample Specs for a 43 Weaver

  • Type: Modern Bay Built
  • Engines: Single Cummins QSB 6.7 550HP
  • Hull: Cold Molded
  • LOA: 43’
  • Beam: 14’
  • Disp: 20,700 Lbs.
  • Fuel: 200 Gallons
  • Water: 55 Gallons
  • Hull Color: TBD

Construction:

  • 1 Layer 9 mm and 1-layer 6mm Okume plywood
  • 1 Layer 1208 Kevlar, and 1 layer of 1708 E-glass outside bottom impregnated with epoxy
  • Laminated Douglas fir stringers glass encapsulated
  • 1 Layer 1208 Kevlar, and 1 layer of 1708 inside bottom to chine
  • Hull side’s layers 1-6mm and 1- 9mm Okume plywood
  • 2 layers E-glass outside impregnated with epoxy
  • Epoxy coated Okume from chine to sheer
  • Laminated Douglas fir battens, sheer clamp and chine
  • All bilges, engine compartment gelcoated
  • 2 Layers 12mm Okume plywood on house sides
  • 2 layers 6mm Okume plywood on floor over 1½” Nidacore
  • 1-layer E-glass impregnated with epoxy each side
  • 1/4” tempered glass, sliding side windows, back and door windows
  • A buildup of epoxy mixed with sand able faring compound and block and sanded smooth.
  • Dockside and overboard pump outs for holding tank
  • Awlcraft high gloss polyurethane boot stripe
  • 6 primer coats of paint
  • Finish Paint: Awlcraft 2000
  • Ablative/Copolymer anti-fouling bottom paint (3 coats), using “Interlux Interprotected epoxy primer system”

General Interior:

  • Interior cabinetry and doors to be custom crafted
  • The Cabinetry is to be constructed with combination of plywood, Divinycell, tri-cell and Nida-core.
  • Countertops to be KVF or Corian
  • Amtico flooring where specified

Exterior Finishes:

  • Awlcraft 2000

General Specs:

  • 200 +/- gal fuel capacity
  • 30-gal water capacity
  • 8” muffler by Centek
  • Aluminum Fuel Tanks
  • (2) 16,000 BTU AC- Crusair with digital control
  • ONGARO windshield wiper deluxe system

Main Salon:

  • Sliding composite door
  • Electrical panel
  • (2) 16,000 BTU AC– Crusair digital control
  • 1/4” tempered glass
  • Sliding side windows, tempered glass
  • Lighting, overhead LED lights
  • Main electrical panel with AC selector breakers
  • Whisper Wall headliner, owner’s choice of color, 1/8” foam and tricot backing
  • Sink, stainless steel, under-mounted in countertop with Chrome galley faucet
  • KVF or Corian countertops

Head:

  • Salt water flush Raritan Atlantes Head
  • A/C Supply
  • Wallpapered walls
  • Lighting, overhead LED lights recessed in ceiling
  • Medicine cabinet with mirrored doors
  • Receptacle, 120V – GFCI

Forward bunk:

  • (2)- V bunk beds
  • Soft goods by Costa Marine Canvas, Inc. including covered cushion
  • Air conditioning/heat with temperature control
  • Hanging locker, teak with bar for hanging clothes
  • Whisper Wall headliner, owner’s choice color, 1/8” foam and tricot backing
  • Storage cabinet located under hanging locker

Running Gear:

  • Flush mount Nibral strut
  • (1) Aquamet 22 DN Double Taper Shaft 2” shaft
  • 4 blade Nibral propellers by Veems
  • 1½” Stainless steel rudder
  • Dripless rudder ports and glands by Tides Marine
  • Shaft tube with dripless shaft seals by Tides Marine

Forward deck:

  • Polished stainless-steel Plow type anchor with 20’ chain and 250’ of rope
  • Non-skid walk area
  • Cleats – (4) 10” cleats and (4) 12” cleats
  • (1) Vetus anchor pull windless system operable from deck or wheelhouse

Cockpit:

  • Dockside electric connection – (1) 30-amp SS shore power inlet and (1) 50’ Hubbell 30A yellow vinyl shore cable
  • Dockside water connection in cockpit
  • Fresh and salt water wash down with hose bib located under gunwale
  • Waterproof deck hatch with access to steering system, trim tabs, generator and pumps
  • Painted non-skid deck
  • Self-bailing cockpit with scuppers
  • Deck fill freshwater tank from dockside inlet

Engine Room and Mechanical:

  • Battery switches – Blue Sea Systems
  • Onan 9 KW Generator with sound shield
  • (4) – bilge pumps
  • Internal sea strainers for generator, and all other sea water pickups
  • Muffler – engines linear type located in engine compartment
  • Muffler – generator
  • PEX plumbing, fresh water system with manifold system to isolate individual areas
  • Propellers, Class “S” pitch tolerance (ISO 484/2) and dynamic balancing. Advanced design cambered blade sections for optimum
  • performance. Nibral alloy for maximum durability.
  • Racor fuel/water separator filters for main engines and single for generator. Clear bowl type, top-loading for convenient replacing
  • Rudder, Nibral composite rudder bearing with dripless seal laminated into hull
  • Seacocks, bronze, ball-type sea valves for all thru- hulls below the water line
  • Shaft – (1) Aquamet high-strength stainless steel, double-taper with machined keyway
  • Struts – thru-water, Nibral bearings
  • Tides Marine water lubricated dripless shaft seal

Plumbing:

  • Cold water supply
  • 55-gal water tank
  • 35 gal Holding tank

Electrical:

  • Wired to ABYC standards All Wires to be labeled at each end
  • (1) 30-amp cords– AC shore power cords
  • Paneltronics Panels
  • Transom mounted zinc
  • All necessary wiring to supply all specified 110 volts and 12-volt systems
  • 120V AC power supply
  • Anchor light/navigation lights
  • Batteries, (2) independent 12V banks maintenance free
  • Battery charger with thermal cutoff and switching system for complete integration
  • Battery distribution panels with battery cutoff for ship service batteries and engine batteries
  • Bonded electrical system with ground plate
  • DC LED interior lighting throughout excluding companionway

Miscellaneous:

  • (2) Fire extinguishers
  • Side-mounted grab rails, aluminum on top of cabin top
  • Stainless steel bow, spring and stern cleats thru-bolted
  • Zinc on transom
  • Install customer supplied winch in cockpit

Build Aluminum Gantry with a 5’ clearance between gunnel and rail with 500 lb capacity